How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that features a unique engine configuration. It’s noisy, but it’s still a lot of fun to drive.
The key fob battery in your Nissan Juke should be replaced every two years or more, or if the battery is low. It’s easy to replace at home, but you’ll require some tools.
Dead Coin Battery
If your Nissan Juke key fob isn’t working the first thing you need to examine is the battery that is inside it. It could be dead and must be replaced. This is a simple fix that only takes several minutes. Flip the fob upside down so that you’ll be able access the tiny latch/release at the back. Remove the old battery and then insert the new one, ensuring sure it’s facing down in the fob and line between the two halves of the fob carefully.
The fob will need to cleaned if it was exposed to water prior to being able to install a new battery. Clean the fob using isopropyl or electronic cleaner, and paper towels. Then let it dry completely prior to reinstalling the battery.
The key fob needs to be linked to the vehicle to start it, which can be done by following the directions in the owners manual or using an OBDII scanner. If the key fob has not been connected, this is most likely the reason of why it isn’t working. It could also be that the fob is equipped with defective chip, however this is rare. In this scenario it is possible that a new receiver could be needed. If this is the situation it should be replaced by a professional technician.
Water Damage
Key fobs are powered by batteries, and the batteries must be replaced every two years or so, or at the first sign of the car not responding when you press the “start” button. The rubber seals on keys keep out water, but submerging your key fob in the pool or ocean can harm the chip’s electronic. If this happens, you’ll need to get the replacement key from nissan note key fob not working or a locksmith.
It’s possible that the computer lost connection to the key fob, which could be due to a variety of reasons. This can be fixed by restarting the car. If the “Key ID error” message is still visible, you will need to contact Nissan for assistance.
The three most common causes of this issue are dead key fob batteries or keys that are not programmed, and a damaged, or malfunctioning key fob. The first two are fairly easy to resolve, and the third one is harder to diagnose and repair immediately, but it can be fixed with a bit of patience. Compare Nissan Key Replacement prices near you with WhoCanFixMyCar and then book your repair online. You can read reviews of local nissan truck key replacement dealerships, nissan tiida key replacement mechanics, and garages in just a few moments.
Faulty Chip
The key fob of your Nissan Juke contains a special chip that sends a message to the vehicle whenever you turn it. If that chip is faulty it could cause the key to cease working. If this is the case, the problem can only be solved by replacing the key. The nissan I Key Juke key may be defective due to a variety of reasons, including water damage or a dead battery for the coin.
Check the chip for water damage If your key fob has stopped working after a bath or wash. Make sure that the metal clips that hold the chip are in good condition. Also, make sure the chip isn’t exposed water. If you notice any signs of water damage to the electronic component, unplug the battery and wipe it down with isopropyl-ethanol or electronic cleaner.
If the chip is not working You’ll need to contact your local locksmith or dealer. To find a replacement, they will require the year, make and model of your vehicle. You’ll also need record your VIN (Vehicle ID Number) so that the dealer or locksmith will know which key you have. This will allow them to check the correct key code, and ensure they are cutting the correct one.
Faulty Receiver Module
The key fob sends the radio frequency signal to your car that performs various functions. It can open the trunk while you rush to get groceries or start your car by pressing the button on the fob. It can also open your windows and turn the horn on if you accidentally lock the keys inside your car.
If the key fob does not work, it may be due to a problem in the receiver module. The receiver modules are tuned to receive specific frequencies that match the signals that are transmitted by the Nissan key fob. If your car is equipped with an inoperable receiver module, it will stop responding to any signal sent by the key fob.
Whatever way your Nissan key fob is damaged, it is always recommended to have a spare key in case the key gets broken or lost. A locksmith or a dealership can program an additional key to work with your Nissan. This will allow you to avoid the hassles of losing your keys or locking them in your car.
If your Nissan Juke’s key fob has been exposed to rain or clean tap water, you can resolve the problem by cleaning it with isopropyl or electronic cleaner. If the chip has fried, you’ll need to buy a new keyfob that can be coded for your vehicle by a locksmith or dealer.
